Panasonic TH-65VX100E Sync, SDI Through, Input signal display, Setting RGB sync signal

Setup for Input Signals

Sync

Select Signal from the “Setup” menu during RGB input signal.

Signal		[ RGB ]
	Sync	Auto
	XGA Mode	1024 ×768

2 change 1 select

Auto on G VBS

Setting RGB sync signal:

Confirm that the input is set to RGB input (this setting is valid only for RGB input signal).

Auto: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V sync.

on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.

VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.

SDI Through

Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).

Note:

Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board (TY-FB11DHD) is selected.

Signal	[ Digital ]
SDI Through	Off

2 change

1 select

Off On

On: Enables active through.

Off: Disables active through.

Input signal display

Displays the frequency and the type of the current input signal.

This display is valid only for Component / RGB / PC and Digital input signal. Display range:

Horizontal 15 - 110 kHz Vertical 48 - 120 Hz

The dot clock frequency is displayed during digital signal input.

H-Freq.	33.7	kHz
V-Freq.	60.0	Hz
Signal Format	1125(1080)/60i
H-Freq.	33.7	kHz
V-Freq.	60.0	Hz
Dot Clock Freq.	108.0	MHz
Signal Format	1125(1080)/60i

40