Accessories
Accessories Supply
Check that you have the accessories and items shown
Operating Instruction book
Remote Control
Transmitter
N2QAYB000323
POS.
/SIZE PICTURE
DISPLAY
FUNCTION
PCCOMPO.
HDMI
フ
CH INPUT | VIDEO |
MENU |
EXT.SCALER OFF TIMER
MEM.
LOAD
DISPLAY
Batteries for the Remote Control Transmitter
(2 × R6 (UM3) Size)
Power supply cord
Fixing band × 1
Remote Control Batteries
Requires two R6 batteries.
1.Pull and hold the hook, then open the battery cover.
Open
Hook
2. Insert batteries - note correct polarity ( + and
Close
“R6 (UM3)” size
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Disposal of batteries should be in an
Observe the following precaution:
1.Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2.Do not combine a used battery with a new one.
3.Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4.Do not attempt to charge,
5.Battery replacement is necessary when remote control acts sporadically or stops operating the Plasma Display set.
6.Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
7.Make a note of the remote control codes before changing batteries in case the codes are reset. (see page 43)
7