Pelco dx8100 manual Linking Relay Outputs to Alarm Events, Linking Relay Outputs to ATM/POS Events

Linking Relay Outputs to Alarm Events

To set relay outputs to activate in response to an alarm event:

1.On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.

2.Click the Linking button .

3.Click the Event-Relay Link Settings tab.

4.In the Alarm Link Settings section, do the following:

a.Select an alarm channel from the Alarm Channel drop-down box.

b.Click the button for each relay you want to link to the selected alarm.

You can also drag relays onto alarms in the Site Tree while in Live mode (main screen).

5.Click Apply.

4a

4b

Figure 102. Event-Relay Link Settings: Alarm Link Settings Section

Linking Relay Outputs to ATM/POS Events

To set relay outputs to activate in response to an ATM/POS event:

1.On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.

2.Click the Linking button .

3.Click the Event-Relay Link Settings tab.

4.In the ATM/POS Link Settings section, do the following:

a.Select an ATM/POS address from the ATM/POS Address drop-down box.

b.Click the button for each relay you want to link to the selected ATM/POS address.

You can also drag relays onto ATM/POS devices in the Site Tree while in Live mode (main screen).

5.Click Apply.

4a

4b

Figure 103. Event-Relay Link Settings: ATM/POS Link Settings Section

C2631M-C (7/09) 131