Pelco dx8100 manual Accessing Programming Features of Remote Cameras

6. Click Clr button again to exit programming mode.

￿

￿

Figure 216. Clearing a Pattern Using Web Client

Accessing Programming Features of Remote Cameras

You can use the PTZ function to program features of remote cameras, such as Pelco’s Spectra III. Only cameras that support remote programming through Pelco D, P, or Coaxitron protocols can use this feature.

To access a programming menu for a remote camera:

1.Drag a camera from the Site Tree onto a view panel.

2.Click the Pgm button to access remote camera setup mode.

For certain camera models, you can also select preset number 95 from the keypad to access remote setup mode. To access preset

number 95, click the Set button , click button 9, 5, and then click the Preset buttonfrom the PTZ keypad.

Figure 217. PTZ Control Panel Using Web Client

C2631M-C (7/09) 241