Pelco dx8100 manual C2631M-C 7/09

The DX8100 supports up to nine different channel mapping views. Selected cameras from the Site Tree can be displayed on the extended monitor and can be assigned to multiple views. Each view is set up independently; removing a camera from one view does not remove it from another.

To set up channel mapping for the extended monitor (VGA or composite):

1.On the DX8100 toolbar, click the Channel Mapping button . The setup page opens to the “Channel Mapping for Extended Monitor” tab. You can also access this page from the Setup dialog box by clicking the Ext. Monitor icon.

Figure 9. Channel Mapping for Extended Monitor Page_C2630MB_0007.tif

2. To assign a camera to a pane, click and drag the camera from the Site Tree onto a pane.

Figure 10. Assigning a Camera to a Pane_C2630MB_0008.tif

3.Repeat step 2 to assign other cameras to the view.

4.To move a camera from one pane to another pane, right-click and drag the camera to the new pane. If the new pane was empty, the N/A moves from the new pane to the old pane. If a camera was already assigned to the new pane, the two cameras switch places.

40 C2631M-C (7/09)