Pelco dx8100 manual Setting UP the Time Period, Configuring E-Mail Notification Frequency

8. Click Test E-mail Notification.

Figure 145. E-Mail Test

SETTING UP THE TIME PERIOD

The DX8100 can be configured to send e-mail notifications on a periodic basis, such as once every ten minutes. This sections describes how to set up the time period and includes the following topics:

•Configuring E-Mail Notification Frequency

•Setting the Time of Day

•Sending E-mail Notifications in Response to Motion Events on page 184

•Sending E-mail Notifications in Response to Alarm Events on page 184

•Sending E-mail Notifications in Response to Video Loss Events on page 185

Configuring E-Mail Notification Frequency

Depending on the volume of motion, alarm, or video loss events detected by the DX8100, the number of e-mail notifications can be far too many to manage effectively. To keep the number of e-mails sent by the DX8100 at a manageable level, the e-mail notification frequency can be adjusted. When events have been detected, e-mail notifications can be sent out in intervals from once per minute up to once every six hours. If no events have been detected during the specified frequency interval, no notification will be sent. Each e-mail notification will include information about the first event detected during the interval, the last event detected during the interval, and a still image (in JPEG format) of the last event.

To configure notification frequency:

1.On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.

2.Click the Notification button . The Notification page is displayed.

3.Click the Emergency E-mail Notification Setup tab.

C2631M-C (7/09) 183