230 C2631M-C (7/09)
Adding a DX8100 Server to a Group with an Unknown IP Address
To add a remote HVR site to a group in the Connection List when you do not know the IP address:
NOTES: To be successful, the following stipulations must be satisfied:
• Each HVR must be attached to the same subnet.
• The first three octets of the IP address of the subnet must be known.
• The range of addresses used in the last octet of the subnet must be known.
1. Click the Connection List button . The Connection List dialog box opens.
Figure 199. Connection List Dialog Box
2. Do the following:
a. Select a group.
b. Click DX8100 Scan. The DX8100 Scan dialog box opens.
Figure 200. DX8100 Scan Dialog Box