Pelco dx8100 manual Editing Schedules, Changing an Existing Schedule Profile

Copying and Applying Schedule Attributes

To copy the schedule attributes of one day and apply them to a different day:

1. From the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.

2. Click the Schedule button . The Schedule page is displayed.

3.Right-click the calendar day you want to copy.

4.Select Copy from the shortcut menu.

Figure 120. Month View Calendar Shortcut Menu

5.Right-click on the calendar day to which you want to apply the copied schedule attributes.

6.Select Paste from the shortcut menu.

7.Click the Apply button at the bottom of the screen.

To change a custom schedule day to a regular schedule day, right-click and select “Revert to daily schedule” from the shortcut menu.

EDITING SCHEDULES

This section describes how to edit a schedule to change its profile or delete a schedule. The following topics are included:

•Changing an Existing Schedule Profile

•Deleting an Existing Schedule Profile on page 149

Changing an Existing Schedule Profile

To change a profile:

1.From the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.

2.Click the Schedule button . The Schedule page is displayed.

3.Click the Month View tab if it is not currently selected.

4.In the drop-down box, select the type of schedule you want to change. Options are as follows:

•All Days

•Weekdays

•Weekends

•Custom Mode

5.Select the schedule profile from the drop-down box.

6.Using your mouse, assign new recording modes and times for each camera you want to schedule. Refer to Setting Up the Camera Recording Mode on page 141 for instructions.

7.Click Save.

148 C2631M-C (7/09)