Pelco dx8100 manual Adding a DX8100 Server to a Group with a Known IP Address

Adding a DX8100 Server to a Group with a Known IP Address

To add a DX8100 server to a group with a known IP address:

1. Click the Connection List button . The Connection List dialog box opens.

Figure 197. Connection List Dialog Box

2.Do the following:

a.Select a group.

b.Click Add. The Server Information dialog box opens.

Figure 198. Server Information Dialog Box

3.Enter the name of the DX8100 Series HVR you want to add to the group.

4.Enter the IP address of the HVR.

5.If necessary enter a new base port number (9002 is the default).

Consult your network administrator before assigning or changing port numbers. Make sure that the ports are not blocked internally, but are protected from external threats by a firewall. Web client and server ports must be identical.

6.If necessary, enter a software upgrade port number (9003 is the default).

7.If necessary, enter a new information port in the Information Port box,(9005 is the default).

8.Click OK. The site appears in the Connection List under the group name.

C2631M-C (7/09) 229