NETGEAR UTM5-100NAS manual Table A-1. UTM Default Configuration Settings, Internet Connection

Appendix A Default Settings and Technical Specifications

You can use the Reset button located on the rear panel to reset all settings to their factory defaults. This is called a hard reset (for more information, see “Reverting to Factory Default Settings” on page 10-18).

•To perform a hard reset, press and hold the Reset button for approximately eight seconds (until the TEST LED blinks rapidly). The UTM returns to the factory configuration settings that are shown in Table A-1below.

•Pressing the Reset button for a shorter period of time simply causes the UTM to reboot. Table A-1shows the default configuration settings for the UTM.

Table A-1. UTM Default Configuration Settings

Feature		Default behavior
Router Login
	User login URL	https://192.168.1.1
	Administrator user name (case sensitive)	admin
	Administrator login password (case sensitive)	password
	Guest user name (case sensitive)	guest
	Guest login password (case sensitive)	password
Internet Connection
	WAN MAC address	Use default address
	WAN MTU size	1500
	Port speed	AutoSense
Local Network (LAN)
	Lan IP address	192.168.1.1
	Subnet mask	255.255.255.0
	RIP direction	None
	RIP version	Disabled
	RIP authentication	Disabled
Default Settings and Technical Specifications		A-1

v1.0, January 2010