NETGEAR UTM50-100NAS, UTM5-100NAS manual Setup Wizard of 10 Signatures & Engine

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Setup Wizard Step 9 of 10: Signatures & Engine

Figure 2-15

Enter the settings as explained in Table 2-9 on page 2-25, then click Next to go the following screen.

Note: After you have completed the steps in the Setup Wizard, you can make changes to the signatures and engine settings by selecting Administration > System Update

>Signatures and Engine. For more information about these settings, see “Updating the Scan Signatures and Scan Engine Firmware” on page 10-21.

2-24 Using the Setup Wizard to Provision the UTM in Your Network

v1.0, January 2010