NETGEAR UTM50-100NAS manual Radius Client Settings, Primary Radius Server, Backup Radius Server

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

3.Complete the fields and select the radio buttons as explained Table 7-14.

Table 7-14. RADIUS Client Settings

Item Description (or Subfield and Description)

Primary RADIUS Server

Select the Yes radio button to enable and configure the primary RADIUS server, and then enter the settings for the three fields below. The default setting is that the No radio button is selected.

Primary Server IP Address	The IP address of the primary RADIUS server.
Secret Phrase	The a shared secret phrase to authenticate the transactions between the
	client and the primary RADIUS server. The same Secret Phrase must be
	configured on both the client and the server.
Primary Server NAS	The primary Network Access Server (NAS) identifier that must be present
Identifier	in a RADIUS request.
	Note: The UTM functions as a NAS, allowing network access to external
	users after verification of their authentication information. In a RADIUS
	transaction, the NAS must provide some NAS identifier information to the
	RADIUS server. Depending on the configuration of the RADIUS server,
	the UTM’s IP address might be sufficient as an identifier, or the server
	might require a name, which you must enter in this field.
Backup RADIUS Server

Select the Yes radio button to enable and configure the backup RADIUS server, and then enter the settings for the three fields below. The default setting is that the No radio button is selected.

Backup Server IP Address	The IP address of the backup RADIUS server.
Secret Phrase	The a shared secret phrase to authenticate the transactions between the
	client and the backup RADIUS server. The same Secret Phrase must be
	configured on both the client and the server.
Backup Server NAS	The backup Network Access Server (NAS) identifier that must be present
Identifier	in a RADIUS request.
	Note: See the Note above for the Primary Server NAS Identifier.
Connection Configuration
Time out period	The period in seconds that the UTM waits for a response from a RADIUS
	server.
Maximum Retry Counts	The maximum number of times that the UTM attempts to connect to a
	RADIUS server.

4.Click Apply to save your settings.

7-42 Virtual Private Networking Using IPsec Connections

v1.0, January 2010