NETGEAR UTM5-100NAS, UTM50-100NAS manual Setting DMZ WAN Rules

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

To create a new inbound LAN WAN service rule:

1.In the LAN WAN Rules screen, click the Add table button under the Inbound Services table. The Add LAN WAN Inbound Service screen displays.

Figure 5-4

2.Enter the settings as explained in Table 5-3 on page 5-8.

3.Click Apply to save your changes. The new rule is now added to the Inbound Services table.

Setting DMZ WAN Rules

The firewall rules for traffic between the DMZ and the Internet are configured on the DMZ WAN Rules screen. The default outbound policy is to allow all traffic from and to the Internet to pass through. You can then apply firewall rules to block specific types of traffic from either going out from the DMZ to the Internet (outbound) or coming in from the Internet to the DMZ (inbound).

There is no pull-down menu that lets you set the default outbound policy as there is on the LAN WAN Rules screen. You can change the default outbound policy by blocking all outbound traffic and then enabling only specific services to pass through the UTM. You do so by adding outbound services rules (see “DMZ WAN Outbound Services Rules” on page 5-17).

Firewall Protection 5-15

v1.0, January 2010