NETGEAR UTM50-100NAS, UTM5-100NAS manual System, E-mail, and Syslog Logs on

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Table 11-1. WAN Traffic Meter Settings (continued)

Setting	Description (or Subfield and Description)
When Limit is reached
Block traffic	Select one of the following radio buttons to specify what action the UTM performs
	when the traffic limit has been reached:
	• Block All Traffic. All incoming and outgoing Internet and e-mail traffic is
	blocked.
	• Block All Traffic Except E-Mail. All incoming and outgoing Internet traffic is
	blocked but incoming and outgoing e-mail traffic is still allowed.
Send e-mail alert	An e-mail alert is sent when traffic is blocked. Ensure that e-mailing of logs is
	enabled on the Email and Syslog screen (see “Configuring and Activating
	System, E-mail, and Syslog Logs” on page 11-6).

3.Click Apply to save your settings.

4.For the dual-WAN port models only, click the WAN2 Traffic Meter submenu tab. The WAN2 Traffic Meter screen displays. This screen is identical to the WAN1 Traffic Meter screen (see Figure 11-1 on page 11-2).

5.For the dual-WAN port models only, repeat step 2 and step 3 for the WAN2 interface.

To display a report of the Internet traffic by type, click the Traffic by Protocol option arrow at the top right of the WAN1 Traffic Meter or WAN2 Traffic Meter screen (dual-WAN port models), or at the top right of the WAN Traffic Meter screen (single-WAN port models). The Traffic by Protocol screen appears in a popup window. The incoming and outgoing volume of traffic for each protocol and the total volume of traffic is displayed. Traffic counters are updated in MBs; the counter starts only when traffic passed is at least 1 MB. In addition, the popup screen displays the traffic meter’s start end dates.

Figure 11-2

11-4 Monitoring System Access and Performance

v1.0, January 2010