NETGEAR UTM50-100NAS, UTM5-100NAS manual Auto-Rollover Mode Settings Dual-WAN Port Models Only

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

To configure the dual-WAN ports for auto-rollover mode:

1.Select Network Config > WAN Settings from the menu, then click the WAN Mode tab. The WAN Mode screen displays.

Figure 3-8

2.Enter the settings as explained in Table 3-5.

Table 3-5. Auto-Rollover Mode Settings (Dual-WAN Port Models Only)

Setting	Description (or Subfield and Description)
Port Mode
Auto-Rollover using	Select the Auto-Rollover using WAN port radio button. Then, from the pull-down
WAN port	menu, select the WAN port that must function as the as the primary link for this
	mode.
	Note: Ensure that the backup WAN port is configured before enabling Auto-
	Rollover mode.

3-12 Manually Configuring Internet and WAN Settings

v1.0, January 2010