NETGEAR UTM50-100NAS, UTM5-100NAS manual Changing Group Names in the Network Database

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Editing PCs or Devices in the Network Database

To edit PCs or devices manually in the Network Database:

1.In the Known PCs and Devices table of the LAN Groups screen (see Figure 4-5 on page 4-14), click the Edit table button of a table entry. The Edit Groups and Hosts screen displays (see Figure 4-6, which contains some examples).

Figure 4-6

2.In the Edit Known PC and Device section, specify the fields and make selections from the pull-down menus as explained in step 1 of the previous section (“Adding PCs or Devices to the Network Database” on page 4-15).

3.Click Apply to save your settings in the Known PCs and Devices table.

Changing Group Names in the Network Database

By default, the groups are named Group1 through Group8. You can rename these group names to be more descriptive, such as GlobalMarketing and GlobalSales.

To edit the names of any of the eight available groups:

1.Select Network Config > LAN Settings from the menu. The LAN Settings submenu tabs appear, with the LAN Setup screen in view.

2.Click the LAN Groups submenu tab. The LAN Groups screen displays (see Figure 4-5 on page 4-14, which shows some examples in the Known PCs and Devices table).

4-16 LAN Configuration

v1.0, January 2010