NETGEAR UTM5-100NAS, UTM50-100NAS manual Add and Edit Block Scanning Exception Settings

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

3.Enter the settings as explained in Table 6-13.

Table 6-13. Add and Edit Block Scanning Exception Settings

Setting	Description (or Subfield and Description)
Action	From the pull-down menu, select the action that the UTM applies:
	• allow. The exception allows access to an application, Web category, or URL that is
	otherwise blocked.
	• block. The exception blocks access to an application, Web category, or URL that is
	otherwise allowed.
Applies to	The group to which the exception applies. you can configure groups in “Managing
	Groups and Hosts (LAN Groups)” on page 4-12.
Start Time	The time in 24-hour format (hours and minutes) when the action starts. If you leave
	these fields empty, the action applies continuously.
End TIme	The time in 24-hour format (hours and minutes) when the action ends. If you leave these
	fields empty, the action applies continuously.
Category	From the pull-down menu, select the category to which the action applies:
	• URL Filtering. The action applies to a URL. Enter the URL in the Subcategory/
	Expression field.
	• Web category. The action applies to a Web category. Select a category from the
	Subcategory/Expression pull-down menu.
	• Application. The action applies to an application. Select an application from the
	Subcategory/Expression pull-down menu.
Subcategory/	The nature of the Subcategory/Expression field depends on your selection from the
Expression	Category pull-down menu.
	• When you select URL Filtering: The Subcategory/Expression field becomes a blank
	field in which you can enter a full or partial URL.
	• When you select Web category: The Subcategory/Expression field becomes a pull-
	down menu that lets you select a Web category.
	• When you select Application: The Subcategory/Expression field becomes a pull-
	down menu that lets you select an application.
Notes	A description of the exception rule for identification and management purposes or any
	other relevant information that you wish to include.

4.Click Apply to save your settings. The new exception rule is added to the Exceptions table.

5.Select the checkbox to the left of the rule that you want to enable or click the Select All table button to select all rules.

6.Click the Apply table button to enable the selected rule or rules.

To make changes to an existing exception rule:

1.In the Action column to the right of to the exception rule, click the Edit table button. The Add or Edit Block/Accept Exceptions screen displays (see Figure 6-18 on page 6-42).

Content Filtering and Optimizing Scans 6-43

v1.0, January 2010