Setting the Bass Level
You can emphasize or weaken the bass level.
4 Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.
•If no operation is performed within 60 seconds, the bass control setting will be turned off automatically.
•The bass level settings will be individually memorized for each source (FM, MW (LW), CD, etc.) until the setting is changed. The bass frequency and bass band width settings adjusted for one source are effective for all other sources (FM, MW (LW), CD etc.).
•Depending on the connected devices, some functions and display indications do not work. However, Bass Level is still adjustable if an audio processor with the Bass function is connected.
•This function is inoperable when DEFEAT is set to ON.
•While in the bass adjusting mode, TREBLE CONTROL adjusting
mode can be recalled by pressing 
or 
.
*The adjustment can also be made by pressing MODE. Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 25).
Bass level indicator’s display
Bass level is usually displayed.
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal preference.
1 Press MENU to select the BASS ENGINE mode, then press MODE.
BASS ENGINE 
SETUP 
RETURN (OFF) 
BASS ENGINE
2 Press 
or 
to select the TREBLE (treble Center frequency) control mode.
BASS 
TREBLE
Setting the Treble Centre Frequency
10.0kHz 
12.5kHz 
15.0kHz 
7.5kHz 
10.0kHz
Emphasizes the displayed Treble frequency ranges.
Setting the Treble Level
You can emphasize the treble level.
4 Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.
•If no operation is performed within 60 seconds, the treble control setting will be turned off automatically.
•The treble level settings will be individually memorized for each source (FM, MW (LW), CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, MW (LW), CD, etc.).
•Depending on the connected devices, some functions and display indications do not work. However, Treble Level is still adjustable if an audio processor with the Treble function is connected.
•This function is inoperable when DEFEAT is set to ON.
•While in the treble adjusting mode, BASS CONTROL adjusting mode
can be recalled by pressing 
or 
.
*The adjustment can also be made by pressing MODE. Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 25).
Turning Loudness On/Off
Loudness introduces a special low- and
Press and hold the MODE for at least 2 seconds to activate or deactivate the loudness mode.
“LD” indicator lights.
