•When the Scroll Setting (page 29) is set to “SCROLL MANU,” press and hold TITLE for at least 2 seconds to scroll the Text information only once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE NAME DISPLAY or TAG DISPLAY mode).
•“NO SUPPORT” is displayed when the desired text information cannot be displayed on this unit.
•The text or tag information may not be correctly displayed, depending on the contents.
Displaying Time
Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Text” (page 27).
•Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display.
•When the power is off but the ignition key is on, press TITLE to display the time.
Blackout Mode On and Off
When Blackout mode is turned on, the display and button illumination will turn off to reduce power consumption. This additional power enhances the sound quality.
Press and hold FUNC. for at least 2 seconds to activate the blackout mode.
The display and button illumination will turn off.
•If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode.
To cancel Blackout mode, press and hold FUNC. for at least 2 seconds
Setting the Wallpaper
A data file downloaded from the ALPINE Owner’s website is written to a
The wallpaper file can be saved and displayed as long as a disc is not inserted, or while playing a CD/MP3/WMA audio, or if a DVD disc is stopped.
•If several files are stored in a disc, only the first file will be stored on the unit.
Insert a CD-R/CD-RW disc containing data.
After sensing the disc, the data file is updated.
•Up to 2 files can be stored on this unit. If a third file is downloaded, the first file is overwritten and new one memorized.
•To change the wallpaper, press and hold ENT. on the remote control unit for at least 2 seconds while disc is not inserted, or while PRE- STOP or STOP is set in disc mode.
•Even if the battery power cable is removed, the downloaded data is not cleared.
SETUP
You can flexibly customize the unit to suit your own preferences and usage. Choose the SETUP menu from Sound Customizing, Visual Customizing, etc., to select your desired setting.
Rotary SOURCE/
encoder POWER BAND MENU
MODE
A typical SETUP procedure is shown in steps 1 to 4 as follows. See below for further information about each SETUP menu.
1 Press MENU to select the SETUP mode, then press MODE.
BASS ENGINE 
SETUP 
RETURN (OFF) 
BASS ENGINE
SETUP mode is activated.
2 Press 
or 
to select the desired SETUP menu, then press MODE.
(e.g. Select SUBWOOFER)
FM LEVEL 
RDS REGIONAL*1 
PI SEEK*2 
ALERT PTY31*3 
AUTO CLOCK*4 
ILLUMINATION 
DIMMER 
SUBWOOFER 
(SUBW SYSTEM)*5 
PLAY MODE 
SCROLL TYPE 
TEXT SCROLL 
INT MUTE 
AUX IN 
(AUX NAME)*6 
POWER IC 
OPT OUTPUT 
DEMO 
FM LEVEL
*1 Refer to “Receiving RDS Regional (Local) Stations” (page 11). *2 Refer to “PI SEEK Setting” (page 12).
*3 Refer to “Setting PTY31 (Emergency Broadcast) reception” (page 12).
*4 Refer to “Setting the Time to automatically Adjust” (page 12). *5 Displayed only when SUBW is ON.
*6 Displayed only when AUX is ON.
3 Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4 Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.
