5 To pause playback, press 
/ 
.
Pressing 
/ 
again will resume playback.
6 To eject the disc, press 
, after pressing 
(OPEN) to open the front panel.
•Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either.
•If the CD does not eject, press and hold 
for at least 2 seconds.
•The
•A WMA format file that is protected by DRM (Digital Rights Management) cannot be played back on this unit.
•The track display for MP3/WMA data playback is the file numbers recorded on the disc.
•The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.
•If 
is pressed during M.I.X. DISC playback, new file will be played back in a random sequence. If 
is pressed, the beginning of the current file will be played back.
MP3/WMA Play Display
The folder number and file number will be displayed as described below.
F01 T03 10'15
Folder number File number Elapsed time
displaydisplay
•Press TITLE to switch the display. Please see “Displaying the Text” (page 27) for information about display switching.
•If the folder number or file number is three digits, F or T becomes numbers of hundred rank.
Repeat Play
Press 
4 to play back repeatedly the track being played.
The track (file) will be played repeatedly.
Press 
4 again and select RPT 
to deactivate repeat play.
CD mode :
: Only a track is repeatedly played back
: A disc is repeatedly played back
*1 When a CD changer is connected
•If REPEAT is set to ON during M.I.X. (M.I.X. ONE) play in CD changer mode, M.I.X. will apply to the current disc only.
MP3/WMA mode :
: Only a file is repeatedly played back
: Only files in a folder are repeatedly played back
: A disc is repeatedly played back
*2 When an MP3 compatible CD changer is connected
•If a
In CD changer mode, press FUNC. to illuminate the “FUNC” indicator, and go to the step above within 10 seconds.
•If a
In CD changer mode, press FUNC. twice to illuminate the “FUNC” indicator, and go to the step above within 10 seconds.
