Installation
Caution
Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.
Air ventilation hole
| (Rear side) |
|
Accessory List |
| |
• | Head unit | 1 |
• | Power cable | 1 |
• FULL SPEED™ Connection Cable | 1 | |
• | Mounting sleeve | 1 |
• | Carrying case | 1 |
• | Rubber Cap | 1 |
• | Hex Bolt | 1 |
• | Screw (M5x8) | 4 |
• RCA extension cable (Video) (2m) | 1 | |
• | Remote control | 1 |
• | Battery (CR2025) | 1 |
• | Owner’s Manual | 1 set |
•The main unit must be mounted within 35 degrees of the horizontal plane, back to front.
Less than 35°
1 | Rubber Cap |
| |
| (Included) |
| Bracket |
Hex Bolt (Included)
Dashboard
Mounting sleeve (Included)
this unit
Slide mounting sleeve from main unit (see “Removal” on page 64). Slide the mounting sleeve into the dashboard and fix it with the metal shackles.
2
Metal Mounting Strap
Screw
∗ Bolt Stud
Hex Nut (M5)
this unit
When your vehicle has the Bracket, mount the long hex bolt onto the rear panel of the
•For the screw*, provide a proper screw to the chassis installing location.
3 | Slide the |
| unit is in place, make sure the locking pin is fully |
seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel.
Lock pin
