Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc.
1 Turn off the unit power.
2 Press 
(OPEN) to open the front panel, then remove it.
3 Press RESET with a ballpoint pen or similar pointed object.
RESET switch
Adjusting Volume
Turn the Rotary encoder until the desired sound is obtained.
Setting Time
1 Press TITLE repeatedly until the time is displayed.
For details, see “Displaying the Text” (page 27).
2 Press and hold TITLE for at least 2 seconds while the time is displayed.
The time indication will blink.
3 Turn the Rotary encoder to adjust the hours while the time indication is blinking.
4 When the hour has been adjusted, press MODE.
5 Turn the Rotary encoder to adjust the minutes while the time indication is blinking.
The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing
TITLE.
•To synchronize the clock to another clock/watch or radio time announcement, press and hold MODE for at least 2 seconds after setting the “hour.” Minutes will reset to 00. If the display shows over “30” minutes when you do this, the time will advance one hour.
Radio
| Rotary |
| SOURCE/ | TUNE/ | |||||||||
| encoder |
| POWER BAND | A.ME | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MODE | FUNC. Preset buttons |
| (1 through 6) |
Listening to Radio
1 Press SOURCE/POWER until a radio frequency appears in the display.
2 Press BAND repeatedly until the desired radio band is displayed.
F1 (FM1) 
F2 (FM2) 
F3 (FM3) 
MW 
LW 
F1 (FM1)
3 Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode) 
SEEK (Local mode) 
OFF (Manual mode) 
DX SEEK
•The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4 Press 
or 
to tune in the desired station.
Holding down 
or 
will change the frequency continuously.
