NETGEAR UTM5-100NAS, UTM50-100NAS manual Mask

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

2.In the upper left of the Policy Editor window, click the New Connection icon (the first icon on the left) to open a new connection. Give the new connection a name; in this example, we are using ModeConfigTest.

Figure 7-28

3.Enter the settings as explained in Table 7-17.

Table 7-17. Security Policy Editor: Remote Party, Mode Config Settings

	Setting	Description (or Subfield and Description)
	Connection Security	Select the Secure radio button. If you want to connect manually only, select the
		Only Connect Manually checkbox.
	ID Type	From the pull-down menu, select IP Subnet.
	Subnet	Enter the LAN IP subnet address that you specified on the Add Mode Config
		Record in the Local IP Address field. If you left the Local IP Address field blank,
		enter the UTM’s default IP subnet address. In this example, we are using
		192.168.1.0.
	Mask	Enter the LAN IP subnet mask that you specified on the Add Mode Config
		Record in the Local Subnet Mask field. If you left the Local Subnet Mask field
		blank, enter the UTM’s default IP subnet mask. In this example, we are using
		255.255.255.0.
	Protocol	From the pull-down menu, select All.
Virtual Private Networking Using IPsec Connections			7-51

v1.0, January 2010