NETGEAR UTM50-100NAS, UTM5-100NAS manual Services Settings, Tcp

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

2.In the Add Customer Service section of the screen, enter the settings as explained in Table 5-6.

Table 5-6. Services Settings

Setting	Description (or Subfield and Description)
Name	A descriptive name of the service for identification and management purposes.
Type	From the Type pull-down menu, select the Layer 3 protocol that the service uses as its
	transport protocol:
	• TCP.
	•	UDP.
	•	ICMP.
ICMP Type	A numeric value that can range between 0 and 40. For a list of ICMP types, see
	http://www.iana.org/assignments/icmp-parameters.
	This field is enabled only when you select ICMP from the Type pull-down menu.
Start Port	The first TCP or UDP port of a range that the service uses.
	This field is enabled only when you select TCP or UDP from the Type pull-down menu.
Finish Port	The first TCP or UDP port of a range that the service uses. If the service uses only a
	single port number, enter the same number in the Start Port and Finish Port fields.
	This field is enabled only when you select TCP or UDP from the Type pull-down menu.

3.Click Apply to save your settings. The new custom service is added to the Custom Services table.

To edit a service:

1.In the Custom Services table, click the Edit table button to the right of the service that you want to edit. The Edit Service screen displays.

Figure 5-20

5-34 Firewall Protection

v1.0, January 2010