3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it (page
38).
4Select “Call Options”, then press
{>}.
5Select “ARS Settings”, then press
{>}.
6Select “Area Code”, then press {>}.
7Select an area code location
L If the location already contains an area code, the code is displayed.
8Enter an area code (5 digits max.), then press {j/OK}.
9Press {ih}.
Setting call restriction
You can restrict the base unit or selected handsets from dialling certain numbers. Up to 6 phone numbers can be stored. Storing area codes here will prevent the restricted extensions (the base unit or selected handsets) from dialling any phone number in that area code.
Important:
L Call restriction can be set using handset 1 only. (To confirm which handset is handset 1, press {x} and {1} on the base unit.
Handset 1 will ring.)
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it (page
38).
4Select “Call Options”, then press
{>}.
5Select “Call Restrict”, then press
{>}.
L The base unit extension number “0” and the extension numbers of all registered handsets are displayed.
Select “Call Bar”, then press {>}. Select “On” or “Off”, then press {>}. Press {ih}.
37
