Panasonic KX-TG1840AL Turning the power on/off, Setting the date and time, Power on, Power off

TG1840AL(e-e).book Page 16 Tuesday, April 11, 2006 11:02 AM

Preparation

1Press the notch on the handset cover firmly and slide it in the direction of the arrow.

2Remove the old batteries positive (S) terminal first and install the new ones. See page 14 for battery installation.

Turning the power on/off

Power on

Press {ih} for about 1 second.

L The display will change to the standby mode.

Power off

Press {ih} for about 2 seconds. L The display will go blank.

Setting the date and time

Important:

L Confirm that the AC adaptor is connected. L Ensure that w is not flashing.

1Press {j/OK}.

2Select “Handset Setup”, then press

{>}.

3Select “Time Settings”, then press

{>}.

4Select “Set Date & Time”, then press

{>}.

5Enter the current day, month and year by selecting 2 digits for each.

Example: 17 May, 2005 Press {1}{7} {0}{5} {0}{5}.

6Enter the current hour and minute by selecting 2 digits for each.

L You can select “AM”, “PM” or 24-hour time entry by pressing {*} repeatedly.

Example: 3:30 PM

Press {0}{3} {3}{0}, then press {*} repeatedly until “03:30 PM” is displayed.

7Press {j/OK}.

8Press {ih}.

Note:

L To correct a digit, press {<} or {>} to move the cursor, then make the correction.

L The date and time may be incorrect after a power failure. In this case, set the date and time again.

16