Panasonic KX-TG1840AL Answering calls using the base unit, To adjust the ringer volume

TG1840AL(e-e).book Page 21 Tuesday, April 11, 2006 11:02 AM

Making/Answering Calls

Note:

L The ringer volume cannot be adjusted if the handset is on the base unit.

Answering calls using the base unit

1Press {s}.

2When finished talking, press {s}.

To adjust the ringer volume

Press {>} or {<} when a call is received or when the base unit is in standby mode. 4 volume levels (high/medium/low/off) are available. To turn the ringer volume off, press and hold {<} until the base unit beeps. To turn the ringer volume on again, press {>}.

Note:

L When the ringer volume is turned off, Uis displayed on the base unit.

L When the ringer volume is turned off, the base unit will not ring for outside calls and it will ring at the low level for intercom calls.

L When the message alert feature is on (page 57), the base unit will beep even if the ringer volume is turned off.

To change ringtones

You can change the ringtone used by the base unit.

1Press {>} or {<} when the base unit is in standby mode.

2Press {<} or {>} repeatedly to select the desired ringtone, then press

{5}.

21