JVC LVT1002-012B Turning off the sounds temporarily- Muting, Changing the display brightness

Basic operations

Turning off the sounds temporarily— Muting

From the remote control ONLY:

Press MUTING to turn off the sound through all connected speakers.

“MUTING” appears on the display and the volume turns off (the volume level indicator goes off).

ANALOG L R

SUBWFR

NOTES

•When setting speakers and basic items or adjusting sound, select “DIMMER OFF” to confirm the setting you make on the display.

•When selecting DVD or DVD MULTI as a source using the remote control, DIMMER functions for the DVD player. To dim the display and indication on the receiver, select a source except DVD or DVD MULTI on the remote control, and then press DIMMER.

To restore the sound, press MUTING again.

•Pressing VOLUME +/– (or turning MASTER VOLUME control on the front panel) also restores the sound.

Turning off the power with the Sleep Timer

You can fall asleep while listening to music—Sleep Timer.

From the remote control ONLY:

Press SLEEP repeatedly.

The SLEEP indicator lights up on the display, and the shut-off time changes in 10 minutes intervals.

SLEEP indicator

ANALOG L R SLEEP

SUBWFR

VOL

10 20 30 40 50 60

0 (Canceled) 90 80 70

When the shut-off time comes:

The receiver turns off automatically.

To check or change the remaining time until the shut-off time:

Press SLEEP once.

The remaining time (in minutes) until the shut-off time appears.

• To change the shut-off time, press SLEEP repeatedly.

To cancel the Sleep Timer:

Press SLEEP repeatedly until “SLEEP 0” appears on the display. (The SLEEP indicator goes off.)

• Turning off the power also cancels the Sleep Timer.

Changing the display brightness

You can dim the display.

Press DIMMER repeatedly.

• Each time you press the button, the indication changes as follows:

DIMMER 1: • Dims the display slightly.

•Dims the blue indication lighting source lamps.

DIMMER 2: • Dims the display more than DIMMER 1.

•Dims the blue indication lighting source lamps

	(same as DIMMER 1).
DIMMER 3:	Turns off the display and the blue indication
	lighting source lamps.
DIMMER OFF:	Cancels the dim (normal display).

Basic adjustment of auto memory

This receiver memorizes sound settings for each source:

•when you turn off the power,

•when you change the source, and

•when you change the analog/digital input mode (see page 13).

When you change the source, the memorized settings for the newly selected source are automatically recalled.

The following can be stored for each source:

•Analog/digital input mode (see page 13)

•Tone adjustment (see page 22)

•Subwoofer output level (see page 22)

•Bass boost (see page 23)

•Input attenuator mode (see page 23)

•Balance (see page 23)

•Subwoofer audio position (see page 23)

•Surround/DSP mode selection (see pages 26 – 31)

NOTES

•If the source is FM or AM, you can assign a different setting for each band.

•You cannot assign and store different settings for digital input mode and analog input mode.

Signal and speaker indicators on the display

Signal indicators								Speaker indicators
L	C	R
						R PL ΙΙ			L C	R
		LFE	ANALOG	L	C
			LPCM
				SUBWFR LFE DSP HP				SUBWFR
			DOLBY D	LS	S	RS	AUTO SR
LS	S	RS	DTS				INPUT ATT
									LS	RS

The following signal indicators light up —:

L:• When digital input is selected: Lights up when the left channel signal comes in.

•When analog input is selected: Always lights up.

R:• When digital input is selected: Lights up when the right channel signal comes in.

•When analog input is selected: Always lights up.

C:Lights up when the center channel signal comes in.

LS: Lights up when the left surround channel signal comes in.

RS: Lights up when the right surround channel signal comes in.

S:Lights up when the monaural surround channel signal comes in.

LFE: Lights up when the LFE channel signal comes in.

The speaker indicators light up as follows:

•The subwoofer indicator (SUBWFR) lights up when “SUBWFR” is set to “USE” for Quick Setup (see page 17) or to “YES” for Manual Setup (see page 18).

•The other speaker indicators light up only when the corresponding speaker is set to “SML” or “LRG,” and also when required for the current playback.

15