Operating other manufacturers’ equipment, Dbs

Operating other manufacturers’ equipment

By changing the transmittable signals, you can use the remote control supplied for this unit to operate other manufacturers’ equipment.

•Refer also to the manuals supplied with the other products.

•To operate those components with the remote control, first you need to set the manufacturers’ codes each for the DBS tuner, VCR, and TV.

•After replacing batteries of the remote control, set the manufacturers’ codes again.

❏Changing the transmittable signals for operating a DBS tuner

1Press and hold DBS .

2Press DBS.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

4Release DBS .

Now, you can perform the following operations on the DBS tuner.

After pressing DBS (source selecting button), you can perform the following operations on the DBS tuner.

CHANNEL +/–:Change the channel numbers on the DBS tuner.

1 – 9, 0:Select the channel numbers on the

DBS tuner.

When your DBS tuner turns on or off, you have entered the

correct code.

If more than one codes are listed for your brand of the DBS

tuner, try each one until the correct one is entered.

Manufacturers’ codes for DBS tuner

* Initial setting