Creating realistic sound fields
About relations between speaker layout and Surround/DSP modes
Available Surround/DSP modes will vary depending on how many
speakers are used with this receiver.
Make sure that you have set the speakers information correctly (see pages 16 to 19).
•If only front speakers are connected, you cannot use the Surround modes.
•If surround speakers are not connected, you cannot use DSP modes.
When
Using Surround modes
Once you have adjusted the Surround modes, the adjustment is memorized for each source.
•If you set the speaker information using Smart Surround Setup (see page 16), you do not have to adjust speaker output level.
When operating this receiver using the remote control, always set the mode selector to AUDIO/TV/VCR/DBS.
Before you start, remember...
Make sure that you have set the speaker information correctly (see pages 16 to 19).
Digital Surround is played back, the appropriate multichannel Surround mode is automatically activated (“DOLBY D” or “DTS”) by pressing SURROUND (with the digital input mode selected).
•For Dolby Digital 2 channel software, you can select “PLII MUSIC” or ”PLII MOVIE” by pressing SURROUND.
•For more details, see “Available Surround/DSP modes for each input signal” on page 27.
When connecting 5 speakers and 4 speakers
|
| TV |
|
|
|
| TV |
| |
Front |
| Front |
|
| Front | Front | |||
|
|
| |||||||
|
| Center |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
From the remote control:
KARAOKE SOUND | BASS | TREBLE | |
ZOOM | 1 | 2 | 3 |
|
| BASS | TREBLE |
VFP | 4 | 5 | 6 |
KARAOKE |
|
| |
| 7 | 8 | 9 |
KEY | TV RETURN |
| 100+ |
ANGLE | 10 | 0 | +10 |
KEY | VOCAL | EFFECT | |
REPEAT | 3D |
|
|
DIMMER | SLEEP ANALOG/DIGITAL CANCEL | ||
|
| INPUT | |
SMART S. SETUP | BASS BOOST |
| A.POSITION |
|
| TONE | |
|
|
| SURROUND |
TEST | EFFECT | DECODE | |
SUBWFR | CENTER | L | SURR R |
It will be convenient for you to use the remote control for the sound adjustments, since you can make adjustments from your listening point, and use the test signal.
•For selecting Panorama control for Pro Logic II Music, use the buttons on the front panel.
Surround | Surround | Surround | Surround |
Available Surround modes:
PLII MOVIE (Pro Logic II MOVIE)
PLII MUSIC (Pro Logic II MUSIC)
Available DSP modes:
LIVE CLUB
DANCE CLUB
HALL
PAVILION
ALL CH ST. (All Channel Stereo)
When connecting 3 speakers
Front |
| TV | Front | |
|
|
| ||
|
| Center |
|
|
|
|
Available Surround modes:
PLII MOVIE (Pro Logic II MOVIE)
PLII MUSIC (Pro Logic II MUSIC)
NOTE
When “AUTO SR (Auto Surround)” is turned “ON” (see page 21), Surround mode is automatically activated when you select and start playing back a
1Select and play software you like.
If “AUTO SR (Auto Surround)” is set to “ON”
Playing a digital source automatically activates an appropriate Surround mode. (See page 21.) → Go to step 3.
2Press SURROUND to select an appropriate Surround mode.
•Each time you press the button, the Surround/DSP modes change as follows:
When playing back
L | C | R |
|
SUBWFR LFE |
| ||
DOLBY D |
|
|
|
LS |
| RS | VOL |
DOLBY D or DTS STEREO (Surround/DSP off)
When playing back 2 channel digital software such as Dolby Digital or DTS Digital Surround:
PLII MOVIE |
| PLII MUSIC |
|
STEREO (Surround/DSP off)
When playing back any software other than above:
PLII MOVIE |
|
|
|
|
|
| PLII MUSIC |
|
|
|
| ||||
|
|
|
|
|
| ||||||||||
LIVE CLUB |
|
|
|
| DANCE CLUB |
|
| ||||||||
|
|
| |||||||||||||
HALL |
|
|
|
|
|
| PAVILION |
|
|
|
| ||||
|
|
|
|
|
| ||||||||||
ALL CH ST. |
|
| STEREO (Surround/DSP off) | ||||||||||||
| |||||||||||||||
(Back to the beginning) |
|
|
|
|
|
|
|
28