JVC LVT1002-012B manual Operating other manufacturers’ equipment

Operating other manufacturers’ equipment

❏Changing the transmittable signals for operating a

VCR

1Press and hold VCR .

2Press VCR.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

4Release VCR .

Now, you can perform the following operations on the VCR.

VCR : Turn on or off the VCR.

After pressing VCR (source selecting button), you can perform the following operations on the VCR.

CHANNEL +/–:	Change the channel numbers on the
	VCR.
1 – 9, 0:	Select the channel numbers on the
	VCR.
3:	Start playback.
7:	Stop playback.
8:	Pause playback. To release it, press
	3.
¡:	Fast-wind a tape.
1:	Rewind a tape.

5Try to operate your VCR by pressing VCR .

When your VCR turns on or off, you have entered the correct code.

If more than one codes are listed for your brand of VCR, try

each one until the correct one is entered.

Manufacturers’ codes for VCR

Manufacturer	Codes
JVC	01* – 04
AIWA	05
AKAI	06 – 08
BELL+HOWELL	09
DAEWOO	10
EMERSON	11 – 15
FISHER	16 – 19
G.E.	20, 21
GO VIDEO	22
GOLD STAR	23
GO-VIDEO A	24
GO-VIDEO B	25
HITACHI	20, 26
MAGNAVOX	27 – 29
MITSUBISHI	30 – 33
NEC	34, 35
PANASONIC	36, 37
PHILIPS	27
RCA	38
SAMSUNG	39 – 41
SANYO	16 – 19
SCOTT	42
SHARP	43, 44
SHINTOM	45
SONY	46 – 51
SYMPHO	52
TEKNICA	53, 54
TOSHIBA	55
ZENITH	56

* Initial setting

❏Changing the transmittable signals for operating a

TV

1Press and hold TV .

2Press TV.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

4Release TV .

Now, you can perform the following operations on the TV.

TV :	Turn on or off the TV.
TV VOL +/–:	Adjust the volume.

TV/VIDEO:Change the input mode (either TV

or VIDEO).

After pressing TV (source selecting button), you can perform the following operations on the TV.

CHANNEL +/–:Change the channel numbers.

1 – 9, 0:Select the channel numbers.

5Try to operate your TV by pressing TV .

When your TV turns on or off, you have entered the correct code.

If more than one codes are listed for your brand of TV, try

each one until the correct one is entered.

Manufacturers’ codes for TV

Manufacturer	Codes
JVC	01*
AKAI	02
BELL+HOWELL	03
CENTURION	04
CORONAD	05
DAEWOO	06 – 08
EMERSON	09 – 13
FISHER	14
GE•PANA	15, 16
GE•RCA	17
GOLD STAR	18, 19
HITACHI	20, 21
KTV	22, 23
MAGNAVOX	24
MARANTZ	25
MITSUBISHI	25
PANASONIC	26, 27
PHILIPS	24
PIONEER	28
PROSCAN	29
QUASAR	30
RADIOSHACK	31
RCA	02, 17, 32 – 35
SAMSUNG	36, 37
SANYO	14
SEARS	38
SHARP	39
SONY	40
SYMPHONIC	41, 42
TOSHIBA	38
ZENITH	43,44

* Initial setting

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

69