JVC LVT1002-012B When selecting Medium Room, When selecting Large Room, Your setting is stored

Speaker settings

When selecting “MEDIUM ROOM,”	C
L

•Center speaker delay time is set to1 msec.

•Surround speakers delay time is set to 2 msec.

LS

C

When selecting “LARGE ROOM,”

• Center speaker delay time	L
is set to 0 msec.
• Surround speakers delay time
is set to 0 msec.

LS

R

2.7 m

2.4m

2.1m

RS

R

3.0 m

RS

3Turn MULTI JOG to select the appropriate setting for the item selected in step 2, then press SET.

Your setting is stored.

ANALOG L R

VOL

EX.: When selecting “NO” for “SUBWFR.”

4If you would like to set other items, repeat steps 2 and 3.

Setting the subwoofer information

— SUBWFR (subwoofer)

Register whether you have connected a subwoofer or not.

YES*: Select when you have connected a subwoofer. The subwoofer speaker indicator (SUBWFR) lights up on the display (see page 15). You can adjust the subwoofer output level (see page 22).

Setting the speakers and subwoofer information manually—Manual Setup

You can set the following speakers and subwoofer information manually as you prefer. When you change your speakers, register the information again.

•Subwoofer information—SUBWFR

•Speaker size—FRNT SP, CNTR SP, SURR SP

•Speaker delay time—CNTR DL, SURR DL

•Crossover frequency—CROSS

•Low frequency effect attenuator—LFE

•Dynamic range compression—D.COMP

NO:Select when you have not connected or have disconnected a subwoofer.

*Initial setting

Setting the speakers size

—FRNT SP (front speakers), CNTR SP (center speaker), SURR SP (surround speakers)

Register the sizes of all the connected speakers.

Operating procedure

SOURCE SELECTOR

MASTER VOLUME

DIMMER

SETTING

ADJUST

SURROUND

SET / TUNER PRESET

/ MULTI JOG

PHONES

STANDBY / ON

STANDBY

DVD MULTI

DVD

DBS

VCR

TV

FM / AM

On the front panel ONLY:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1Press SETTING.

MULTI JOG now works for the setting operation.

2Turn MULTI JOG until the setting item you want to set appears on the display, then press SET.

•As you turn MULTI JOG, the indication changes as follows:

ANALOG L R

SUBWFR

VOL

SUBWFR	FRNT SP			CNTR SP
SURR SP	CNTR DL			SURR DL
CROSS		LFE		D.COMP
DIGITAL IN			AUTO SR	DVD VIDEO
DBS VIDEO			QUICK SETUP

(Back to the beginning)

LRG (large): Select when the cone speaker size is larger than 12 cm.

SML (small)*: Select when the cone speaker size is smaller than 12 cm.

NO:Select when you have not connected a speaker. (Not selectable for the front speakers.)

*Initial setting

NOTES

•If you have selected “SML (small)” for the front speaker size, you cannot select “LRG (large)” for the center and surround speaker sizes.

•If you have selected “NO” for the subwoofer setting (see above and page 17), you can only select “LRG (large)” for the front speaker size.

18