AV Compu Link remote control system

The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, DVD player and VCR) through this receiver.

This receiver is equipped with the AV COMPU LINK-III, which has added a function to operate JVC’s video components through the video components terminals. To use this remote control system, you need to connect the video components you want to operate, following the diagrams below and the procedures on page 66.

• Refer also to the manuals supplied with your video components.

CONNECTIONS 1: AV COMPU LINK Connection

VCR

XV-NK58SL

Monaural mini-plugs

COMPU LINK

AV COMPU LINK

COMULINK-III

FM 75

AM LOOP

DVD

FRONT

DVD IN DBS IN MONITOR

DIGITAL 3

DIGITAL 1

CENTER

SURROUND

FRONT

VOLTAGE SELECTOR

ANTENNA

220V

110V

VIDEO

(TV)

(DVD)

SPEAKER

SPEAKERS

SUB-

DVD

DBS

VCR

RIGHT LEFT

COAXIAL

AM EXT

AUDIO

WOOFER

CENTER

VIDEO DIGITAL 2 (DBS) DIGITAL IN

230 -

127V

240V

MONITOR OUT

CAUTION:

SPEAKER

SUBWOOFER

IMPEDANCE

Monaural mini-plugs

DBS

VCR

SURR (REAR)

OUT

8 ~ 16

COMPONENT VIDEO

COMULINK-III

RIGHT

LEFT

RX-ES1SL

IMPORTANT:

The AV COMPU LINK remote control system cannot control the DBS tuner connected to the DBS terminals.

CAUTION:

When connecting the TV with the AV COMPU LINK remote control system, connect the receiver to the AV COMPU LINK EX or AV COMPU LINK-IIIterminal. DO NOT connect the receiver to the AV COMPU LINK RECEIVER/AMP terminal.

NOTES

•When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic selection of TV’s input mode (see page 66).

•When connecting the XV-NK58SL or VCR and TV to this receiver, connect it directly to the receiver using cable with monaural mini-plugs.

CONNECTIONS 2: Video Cable Connection

This receiver is equipped with three types of the video terminals—composite video, S-video, and component video, and the signals coming into this receiver through one type of video terminals can output only through the terminal of the same type. So you need to connect the VCR and TV to this receiver using one of the following three ways.

•When using the AV COMPULINK remote control system, set the component video input for the DVD player and the DBS tuner correctly (see “Setting the video component input mode—DVD VIDEO/DBS VIDEO” on page 21); otherwise, the correct input for this receiver will not be selected on the TV.

CASE 1: When connecting the source equipment to the receiver through the S-video terminals, connect this receiver to the TV’s Video Input 1 terminal using S-video cords.

CASE 2: When connecting the source equipment to the receiver through the composite video terminals, connect this receiver to the TV’s Video Input 2 terminal (composite video input) using composite video cords.

CASE 3: When connecting the source equipment to the receiver through the component video terminals, connect this receiver to the TV’s Video Input 2 terminals (component video input) using component video cords.

Source

Equipment

Source

Equipment

Source

Equipment

S-video cord

Composite video cord

Component video cord

RX-ES1SL

S-video cord

Composite video cord

Component video cord

To Video Input 1

To Video Input 2

(Composite)

To Video Input 2 (Component)

CONTINUED ON THE NEXT PAGE

JVC LVT1002-012B AV Compu Link remote control system, Connections 1 AV Compu Link Connection

Models: LVT1002-012B