Panasonic KX-TG1840AL operating instructions Resetting the base unit to its default settings

TG1840AL(e-e).book Page 38 Tuesday, April 11, 2006 11:02 AM

Base Unit Settings

Other options

Changing the base unit PIN (Personal Identification Number)

For security, the base unit PIN must be entered when changing certain settings. The default PIN is “0000”.

Important:

L If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it.

4Select “Other Options”, then press

{>}.

5Select “Base Unit PIN”, then press

{>}.

6Enter the new 4-digit base unit PIN, then press {j/OK}.

7Press {ih}.

Resetting the base unit to its default settings

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it (page

38).

4Select “Other Options”, then press

{>}.

5Select “Reset Base”, then press {>}.

6Select “Yes”, then press {>}.

7Press {ih}.

Note:

L The following items will be deleted or reset to their default settings:

–Settings listed on page 34, 46, 55

–Base unit ringtone

–Base unit ringer volume (Medium)

–All SMS messages

–Private mailbox settings for SMS

–Caller list

L The following items will be retained:

–Date and time

–Shared phonebook entries

–Repeater mode

–Recordings, including your greeting message, caller messages, voice memos, audible call announcements, and recorded conversations

38