Base Unit Settings
Ringer setup
Night mode
Night mode allows you to select a block of time during which the base unit will not ring for outside calls. This feature is useful for times when you do not want to be disturbed, for example, while sleeping. Night mode can be set independently for the handset (page 30) and the base unit.
Set the date and time beforehand (page 16).
Note:
L To avoid disturbances, we recommend turning the call screening feature off (page
56)in addition to turning the night mode feature on.
Setting the start and end time for night mode
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it (page
38).
4Select “Ringer Setup”, then press
{>}.
5Select “Night Mode”, then press {>}.
6Select “Start/End”, then press {>}.
7Enter the desired hour and minute you wish to start this feature by selecting 2 digits for each.
L If you use
8Enter the desired hour and minute you wish to end this feature by selecting 2 digits for each.
L If you use
9Press {j/OK}.
10Press {ih}.
Turning night mode on/off
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it (page
38).
4Select “Ringer Setup”, then press
{>}.
5Select “Night Mode”, then press {>}.
6Select “On/Off”, then press {>}.
7Select “On” or “Off”, then press {>}.
8Press {ih}.
Setting the ring delay for night mode
This setting allows the base unit to ring during night mode if the caller waits long enough. After the selected amount of time passes, the base unit will ring. If you select “No Ringing”, the base unit will not ring during night mode.
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it (page
38).
4Select “Ringer Setup”, then press
{>}.
5Select “Night Mode”, then press {>}.
6Select “Ring Delay”, then press {>}.
7Select the desired setting, then press
{>}.
8Press {ih}.
Note:
L When the answering system answers the call, this feature does not work.
35
