Panasonic KX-TG1840AL Reading a received message, Erasing received messages, Handset phonebook

TG1840AL(e-e).book Page 45 Tuesday, April 11, 2006 11:02 AM

					SMS (Short Message Service)
– Fis displayed		3		Enter a message (page 48), then press
				{j/OK}.
		4
Reading a received message				Edit the destination phone number
1 Press {j/OK}.				and/or press {j/OK}, then continue
				from step 7, “Writing and sending a new
2 Select “SMS”, then press {>}.				message”, page 43.
3 To access the public mailbox
			Editing/forwarding a message
	Select “Public”, then press {>}.
	To access a private mailbox		1 While reading a received message,
	Select the desired mailbox, press {>},				press {j/OK}.
	then enter its password.	2			Select “Edit Message”, then press
	L If a mailbox contains new (unread)
					{>}, then continue from step 5, “Writing
	SMS messages, “@” is displayed next
					and sending a new message”, page 43.
	to the total number of messages for
	that mailbox.
			Erasing received messages
4 Select “Receive List”, then press
		1		While reading a received message,
{>}.
5 Press {e} or {v} repeatedly to select a		2		press {j/OK}.
	message.			Select “Erase”, then press {>}.
	L Messages which have already been			L To erase all messages in the selected
	read are indicated by a “Q”, even if				mailbox, select “Erase All”, then
	they were read using another handset.				press {>}.
6 Press {j/OK} to read the message		3		Select “Yes”, then press {>}.
	content.	4		Press {ih}.
Note:
L To call the message sender, press {C}			Storing the sender’s number in
	or {s}.		the handset phonebook
L If “SMS Full” is displayed, new SMS		1		While reading a received message,
	messages cannot be received. Erase
	unnecessary messages (page 44, 45).			press {j/OK}.
L If you receive a message from a party		2		Select “Add Phonebook”, then press
	saved in the handset phonebook, the			{>}.
	stored name is displayed.	3		Continue from step 3, “Adding entries to
L Some SMS service providers attach a 1-				the handset phonebook”, page 22.
	digit number to the message sender’s
	phone number, and sender names stored		Editing the sender’s number
	in the handset phonebook may not be
			before calling back
	displayed as a result.
		1		While reading a received message,
Replying to a message
				press {j/OK}.
1 While reading a received message,		2		Select “Edit and Call”, then press
	press {j/OK}.			{>}.
2 Select “Reply”, then press {>}.
				45