BenQ PE5120 Indicator lights, Service information, When the projector is in a normal state

Indicator lights

There are three indicator lights which show the status of the projector. Refer to the following table for description of indicator light operation. If they indicate that something is wrong, note the light status, turn the projector off and contact your dealer.

When the projector is in a normal state ...

POWER	TEMP	LAMP	STATE	REMARK
Orange			Standby mode.
Flashing			The projector is powering up.	Cannot turn the projector off.
Green
Green			The projector is under normal
			operation.
	Off	Off	(1) The projector needs 110
			seconds to cool down as it
			was abnormally shut down
Flashing			without the normal cooling	Cannot turn the projector on.
Orange			down process. Or
			(2) The projector needs to cool
			for 110 seconds after the
			power is turned off.

When the projector is in an abnormal state ...

POWER	TEMP	LAMP	STATE	REMARK
			(1) The projector needs 110
Off	Off	Red	seconds to cool down. Or
			(2) Please contact your dealer
			for assistance.
				If you try to re-start the
Off	Red	Off	The projector has shutdown	projector, it will shutdown
			automatically.	again. Please contact your
				dealer for assistance.
				If you try to re-start the
Off	Red	Green	The projector has shutdown	projector, it will shutdown
			automatically.	again. Please contact your
				dealer for assistance.
				If you try to re-start the
Off	Red	Orange	The projector has shutdown	projector, it will shutdown
			automatically.	again. Please contact your
				dealer for assistance.

Service information

Accessories

Description	Part Number	Description	Part Number
Power cord (US)	27.01818.000	Power cord (Japan)	27.03518.151
Power cord (EU)	27.82718.281	S-Video cable	50.72920.011
Power cord (UK)	27.01018.000	Video cable	50.J1303.501

24 Additional information