Redial the number manually | Panasonic KX-TG1840AL guide

TG1840AL(e-e).book Page 69 Tuesday, April 11, 2006 11:02 AM

	Useful Information

Problem	Cause & solution
Static is heard, sound cuts in and	L Locate the handset and the base unit away from
out. Interference from other	other electrical appliances.
electrical units.	L Move closer to the base unit.
	L Your unit is connected to a telephone line with
	ADSL service. We recommend connecting a filter
	(contact your ADSL service provider) to the
	telephone line between the base unit and the
	telephone line socket.
Noise is heard during a call.	L You are using the handset or base unit in an area
	with high electrical interference. Locate the handset
	and base unit away from interference sources, such
	as antenna and mobile phones.
The handset/base unit stops	L Disconnect the AC adaptor and turn off the
working while being used.	handset. Connect the AC adaptor, turn on the
	handset and try again.
While storing an entry in the	L A call is being received. To answer the call, press
phonebook or assigning a one	{C}. Programming will be cancelled. Start again.
touch dial, the handset starts to
ring.
Pressing {R} does not	L The redialled number was more than 24 digits long.
display/dial the last number dialled.	Redial the number manually.
The handset beeps intermittently	L Fully charge the batteries (page 14).
and/or 7flashes.
I fully charged the batteries, but	L Clean the charge contact and charge again (page
7still flashes.	14).
	L It is time to replace the batteries (page 15).
Caller information is not displayed.	L You must subscribe to Caller ID service.
	L Your unit is connected to a telephone line with
	ADSL service. We recommend connecting a filter
	(contact your ADSL service provider) to the
	telephone line between the base unit and the
	telephone line socket.
	L Caller has withheld information.
While viewing caller information,	L Do not pause for over 1 minute while searching.
the display returns to standby
mode.
I cannot set call restriction.	L Call restriction can be set using handset 1 only. If
	you have multiple handsets, you can confirm which
	handset is handset 1 by pressing {x} and {1} on
	the base unit. Handset 1 will start ringing.

69

Image 69

Panasonic KX-TG1840AL operating instructions Redial the number manually

Contents

Model No. KX-TG1840AL Trademarks Introduction Feature highlights Polyphonic ringtones Useful Information Included accessories Accessory informationAdditional/replacement accessories Model No Description Important information Battery cautionGeneral Environment TG1840ALe-e.book Page 8 Tuesday, April 11, 2006 1102 AM Instructions to customer Installation Service difficulties Controls and displays ControlsINT Intercom Microphone Base unit DisplaysPlay/Stop Handset display icons Base unit display icons Connections Battery installation Battery chargeIf you subscribe to an Adsl service Battery strength Battery icon Battery replacementBattery life Ni-MH batteries 700 mAh Operation Operating time Setting the date and time Turning the power on/offPower on Power off Redial feature Making calls using the handset To erase numbers in the redial list Other featuresVoice enhancer Key lock Button to use the recall feature Making calls using the base unitPause button for PBX/long distance service users Recording a telephone conversation using the handset Auto talk feature Answering calls using the handsetTo adjust the ringer volume when an outside call comes To redial the last number dialled Answering calls using the base unit To adjust the ringer volumeTo change ringtones Handset phonebook Editing entries in the handset phonebook Erasing entries from the handset phonebookOne touch dial Making a call using a one touch dial key Chain dialErasing a one touch dial assignment Adding entries to the shared phonebook Shared phonebookFinding and calling a shared phonebook entry Searching by first character index search Erasing entries from the shared phonebook Editing entries in the shared phonebookChanging a name, phone number, audible call Playing back an audible call announcement Copying handset phonebook entries to other handset Copying phonebook entriesCopying handset phonebook entries to the shared phonebook Copying one entry Handset settings Sub-menu Default setting Menu Guide to handset settings Ringer setup Ringer volumeChanging ringtones Setting the start and end time for night mode Night modeTurning night mode on/off Setting the ring delay for night mode Selecting the standby mode display Display setupSelecting categories to bypass night mode Changing the display language Call options Other options Turning keytones on/off Resetting the handset to its default settings Base unit Sub-menu Default setting Settings menu Guide to base unit settings Night mode Call options Setting pause lengthChanging the recall time Storing/changing emergency numbers Setting call restriction Changing the base unit PIN Personal Identification Number Resetting the base unit to its default settings Using Caller ID service Category features for handset phonebookCall waiting and Caller ID compatible Audible call for shared phonebook Caller listViewing the caller list and calling back Editing a caller’s phone number before calling back Storing caller information into the handset phonebook Voice mail service Using SMS Short Message Service Using public mailbox and private mailboxesTurning SMS on/off To access a private mailbox To access the public mailboxSending a message Writing and sending a new Sending a saved message Receiving a messageEditing and sending a saved message Erasing saved messages Erasing received messages Reading a received messageStoring the sender’s number Handset phonebook Changing private mailbox settings Guide to SMS settingsSMS settings Creating private mailboxes Storing the PBX line access number for PBX users only Available character entries for SMS Character entry modesLetterWise character table for English Following are used for both uppercase and lowercase Greeting message Answering system Using the handset Using a prerecorded greeting messageListening to messages Playing back the greeting message Erasing all messages Listening to new/all messages Direct command operation using the handset Calling back using the handset Caller ID subscribers onlyKey Direct commands Remote operation Using the answering system remotelyTurning remote operation on/off Voice guidance Guide to answering System settingsChanging the number of rings Remotely For Telstra Homeline service subscribers Selecting the caller’s recording timeTurning call screening on/off Turning message alert on/off Registering a handset to a base unit Operating additional unitsAdditional handsets Additional base units Cancelling a handset Cancelling a base unitSelecting a base unit Intercom Increasing the range of the base unitBetween a handset and the base unit Between handsets From a handset to the base unitFrom the base unit to a handset Transferring a call without speaking to the handset user Useful Information Wall mounting Available character entries TG1840ALe-e.book Page 65 Tuesday, April 11, 2006 1102 AM Cyrillic character table P Extended 2 character table O Troubleshooting Initial settingsProblem Cause & solution Call with the base unit Telephone Redial the number manually SMS Short Message Service Answering system Specifications PIN Index TG1840ALe-e.book Page 74 Tuesday, April 11, 2006 1102 AM TG1840ALe-e.book Page 75 Tuesday, April 11, 2006 1102 AM Copyright Sales Department Panasonic Australia Pty. Limited