Raymarine L470 Mounting the Display Unit - Standard Mount, Dismounting the Display Unit

To release the display from the base, press on the right and left sides until you hear the clicks.

Raymarine

PWR

Slide the display out of the bracket.

The display can be turned from side to side.

SETUP

CLEAR ZOOM

A-SCP BOT LOCK

FISHFINDER

L470

The angle of the display

can be changed.

Fig. 2-10

Installation on Bracket

Mounting the Display Unit – Standard Mount

You may mount the display unit on any flat surface using the bracket supplied. See Fig. 2-10. (There is also an optional kit which allows you to flush-mount the display in a flat panel or dashboard). Follow these instructions if you are using the standard mounting bracket:

1.The “LCD” type display used on this unit is easier to see from certain angles. Before selecting a permanent mounting location, make temporary power connections and turn on the unit. This will allow you to test the visibility of the display from several different angles.

2.Remove the display unit from the bracket by pressing on the large button in the center of the bracket. See Fig. 2-10.

3.Mount the base of the bracket using the supplied screws.

4.Slide the display unit back into the bracket.

5.Adjust the display unit for the best viewing angle. You can turn the display from side to side, and tilt it up or down.

Dismounting the Display Unit

See Fig. 2-10. To release the display from the bracket, press and hold down the left and right sides. You will hear an audible “click,” and the bracket will slide out.

16 Installation