Raymarine L470 instruction manual Range Setting, Setup Instructions, Sidelooker

order will be different if you start from the Zoom or Bottom Lock Modes.) To move from one menu item to another, press the < and V arrows of the Page Control Pad. (If you continue to press < and V often enough, you will eventually return to the same menu item which appeared origi- nally.) The unit remembers which menu item was last used for each page, and will display that item the next time you go to the Setup Menu. To return to the normal display, press CLEAR. (The menu will disappear on its own in seven seconds). This arrangement allows you to reach any item on the Setup Menu easily, make a change, then return to the normal display quickly.

Range Setting

Fig. 4-2

Range

Menu Item

See Fig. 4-2. The “range” sets the maximum depth the unit will be able to see. Use the < and > arrows of the Page Control Pad to select Auto or Manual range. The Range menu item for the downlooker is available from all pages except the Digital Page and the Sidelooker Page. (The Sidelooker Page does have a Range menu item, but only for the

Sidelooker.)

Auto range	The FishFinder can be set to select the range by itself,
	automatically. The unit chooses the shallowest range which
	will still include the bottom in the display. If the bottom rises
	or falls, the FishFinder will adjust the range to keep the
	bottom in the display.

Manual range You can also set the range yourself. (However, if the bottom rises or falls, the FishFinder will not adjust for this.) As soon as you select Manual, the cursor will jump down a

Setup Instructions 57