Raymarine L470 instruction manual Resetting the Unit to Factory Defaults, Setup Instructions

Fig. 4-20

Window Page with Option G Selected and Zoom Enabled

Window Page with Sidelooker –

You can combine a Sidelooker view with the Window Page display. Figure 4-20 shows an example where the Sidelooker view has been combined with the Zoom Mode in the Window Page. Notice that, again, the display is split vertically down the middle. There is another vertical division between the parts of the Zoom display. To reach this view, press the

<or > control on the Page Control Pad until the Window Page is dis- played. Press the SETUP button. Press V until you see the Window Menu Item. If the Sidelooker is enabled, Window options A through H will be available. Select F, G, or H to specify a Sidelooker window, and press CLEAR. Next, press ZOOM . The unit will present the FishFinder, Sidelooker, and Zoom information on the same screen.

Resetting the Unit to Factory Defaults

It is easy to reset all of the settings on the FishFinder at the same time.

When the unit is off, hold the CLEAR button. Press the PWR button to turn on the unit. (Release the PWR button first; then, one to two seconds later, release the CLEAR button.) All of the settings will be reset to the values listed below, and the trip log will be reset to zero.

Setup Instructions 81