3 – Operating Instructions
In this section of the manual, we will explain how to operate the unit. (Setup instructions are included in the next section.) Below is a drawing of the display unit.
Display |
|
|
|
area | Raymarine | PWR | Power button |
|
|
| Page control |
|
|
| pad |
|
|
| Setup button |
|
| SETUP | Clear button |
|
| CLEAR | |
|
| ZOOM | Zoom button |
|
| ||
|
|
| |
|
| BOT | |
|
| LOCK | |
|
|
| |
|
| FISHFINDER | Bottom Lock |
|
| L470 | button |
|
|
|
Controls on Display Panel
Fig.
Display Panel
The FishFinder is designed to be easy to use while the boat is moving. You can steady your hand by gripping the right side of the display with the fingers of your right hand. This will allow you to use your right thumb to press the buttons on the display.
Notice that some of the buttons can be used in two ways. They do one job during a normal display, and a different job when you are setting up the unit. In this section, we will use symbols like this – PWR and SETUP – to indicate the buttons on the front of the unit.
PWR
This button turns the power on and off.
To turn on the power – Press once to turn the power on. To enter the Lamp/Contrast Menu – To bring up the Lamp/Contrast Menu in any operating mode, press the PWR key for a moment, then release it.
To turn off the power – If you press and hold the button, the display will say “Powering Off.” If you hold the button for more than 3 seconds, the display unit will switch off.
26 | Operating Instructions |
