Raymarine L470 Performance Modes, Zoom Mode, Operating Instructions, Zoom display

Performance Modes

This unit has three “performance” modes which can be used to add to the standard FishFinder Page. These are the Zoom, A-Scope and Bottom Lock Modes. Each mode presents the raw information from the transduc- ers in a special way. To reach one of these modes, press the correspond- ing button on the unit. See Fig. 3-12.

Zoom Mode

Top of zoom area

Bottom of zoom area

Zoom magnification

Zoom display	Normal
(magnified)	display

Line indicates zoom area

Fig. 3-13

Zoom Mode

The Zoom Mode gives you a way of enlarging or magnifying all or part of the display area. (The “zoomed” display is actually larger only in the vertical direction.) You can reach Zoom at any time by pressing the ZOOM button. For a moment, the display will say, “ENTERING ZOOM MODE,” then the zoomed image will appear.

In Figure 3-13, only part of the display is zoomed. In this “split” display, the right side shows the same information as the FishFinder Page. The left side shows the magnified view. In each case, the new information appears at the right edge of the display, and moves to the left.

50 Operating Instructions