Raymarine L470 instruction manual Setup Instructions, Code, Units used for speedUnits used by

Depth Units This item sets the units used by the depth display. You can choose feet (FT), fathoms (FA), or meters (M). Use the

<and > controls to make your choice.

Speed Units	This item sets the units used by the speed display. The
	same units are used for the distance (“log”) display. There
	are three choices:
	Code	Units used for speedUnits used by
	log
	MPH	Miles per hour	Statute miles
	KTS	Knots	Nautical miles
	KPH	Kilometers per hour	Kilometers
Temp Units	This item sets the units used by the temperature display.
	You can choose Fahrenheit degrees (°F) or Celsius
	degrees (°C). Use the < and > controls to make your
	choice.
Speed	A speed indication appears on all of the normal displays. If
	you do not want to see this item, you can turn it off using
	this line of the System Setup Menu. Use the < and >
	controls to make your choice. (The value for Speed will still
	appear on the Window and Digital Pages.)
Log	On all of the normal displays, an entry for “log” indicates the
	distance traveled. You can turn off this item using this line
	of the System Setup Menu. Use the < and > controls to
	make your choice. (The value for Log will still appear on
	the Window and Digital Pages.) Notice that the units used
	by the log are set by changing the entry for Speed Units.
Temp	An entry for temperature appears on all of the normal
	displays. You can turn this item off using this line of the
	System Setup Menu. Use the < and > controls to make

your choice. (This item will still appear on the Window and Digital Pages.)

If you are done with your setup changes, press the to the normal display.

CLEAR

button to go back

70 Setup Instructions