Raymarine L470 instruction manual Up and down arrows - and, Left and right arrows - and, Clear

Page Control Pad

SETUP

CLEAR

Up and down arrows – ( < and V)

During setup – Use these controls to call up a choice or move to the next line on a menu.

If the Zoom display is turned on – If the manual zoom feature is turned on, these will move the zoom display up or down.

Left and right arrows – (< and >)

During normal display – Use these buttons to go to the next display.

During setup – Use these arrows to make a choice within a line on the menu.

To enter the Setup Menu – Press SETUP at any time. To go to the System Setup Menu – Press this button twice in all normal displays. If the sidelooker split screen (Window Page options F, G, or H) is enabled, this button must be pressed three times.

During setup – Once you make a change, press SETUP to save the change and go back to the normal display.

During normal display – When an alarm is triggered, use CLEAR to turn off the buzzer. (The alarm will continue to be indicated on the display.)

During setup – Once you make a change, press CLEAR to save the change and go back to the normal display.

When the unit is first turned on, it will present the normal FishFinder Page. You can reach the Zoom, A-Scope and Bottom Lock Modes by pressing buttons on the control panel. See Fig. 3-12.

ZOOM

A-SCP

The “Zoom” Mode shows a magnified view of a section of the display area.

The “A-Scope” Mode shows a “real time” view of the area directly under the transducer.

Operating Instructions 27