Lanier 5613 manual When copying onto OHP transparencies, Push down the paper guide re- lease lever

Copying

	Note
	❒ Set the direction of the copy pa-
	per to L.
	❒ Swing out the extender to sup-
	port paper sizes larger than
	A4L, 81/2" ⋅ 14"L.
	❒ Fan paper to get air between the
2
	sheets and avoid a multi-sheet

feed.

Reference

For details about how to set the copy paper, see p.28 “When copying onto OHP transparen- cies”, p.29 “When copying onto standard size paper”, p.29 “When copying onto custom size copy paper” or p.30 “When copying onto envelopes”.

D Push down the paper guide re- lease lever.

When copying onto OHP transparencies

A Press the {User Tools/Counter} key.

B Press the 0 or 1 key to display

“3. Copier Features”, and then press the {OK} key.

C Press the 0 or 1 key to display “6. Bypass Paper Type”, and then press the {OK} key.

Note

❒If you set A4, 81/2" ⋅ 14" or larg- er copy paper, hold the edge of the paper and push down the paper guide release lever.

❒If you do not push down the pa- per guide release lever, a mis- feed might occur.

❒You can specify the type of pa- per used for the bypass tray. See “6. Bypass Paper Type” in p.56 “Copier Features”

E Place your originals, and then

28press the {Start} key.

D Press the 0 or 1 key to display “Special/OHP”, and then press the {OK} key.

E Press the {User Tools/Counter} key to exit from the user tools.