On indicator, Operation switch, Control panel | Lanier 5613 guide

8.On indicator

This indicator lights up when the opera- tion switch is turned on, and goes off when the switch is turned off.

9.Operation switch

Press this switch to turn the power on (the On indicator lights up). To turn the power off, press this switch again (the On indicator goes off).

10.Control panel

See p.4 “Control Panel”.

1.Bypass tray

Use to copy onto OHP transparencies, adhesive labels, translucent paper, post- cards, envelopes, and custom size paper. See p.27 “Copying from the Bypass Tray”.

11.Front cover

Open to access the inside of the machine.

12.Paper tray

Place paper here. See p.42 “ hLoading Paper”.

13.Paper tray unit (option)

Holds 500 sheets of paper.

14.Internal tray guide

Swing out to support large papers and raise the end fence.

2.Right cover

Open this cover to remove jammed paper fed from the paper tray.

3.Lower right cover

Open this cover to remove jammed paper fed from the optional paper tray unit.

2

Image 14

Lanier 5613 manual On indicator, Operation switch, Control panel, Bypass tray, Front cover, Paper tray unit option

Contents

5613 Means Power ON. c means Stand by Safety Information Safety During OperationPage Positions of Labels and Hallmarks for Rwarning and Rcaution How to Read this Manual Symbols Machine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components Control panel On indicatorOperation switch Bypass tray Options Paper tray unit Copier only Fax and/or printer installed Control Panel Printer function keys Printer in- stalled machine only Fax function keys Fax installed machine onlyDial Function keys Fax in- stalled machine only Number keys Copy display Panel DisplayDisplays and Key Operations Common keys Operation switch right side of the control panel Turning On the PowerTurning On the Main Power Main power switch left side of the machine Turn off the main power switch Turning Off the Main PowerPress the operation switch to make the On indicator go on Starting the Machine Changing Modes Inch version OriginalsMetric version Non-recommended originals for the document feeder ADF Original Sizes and Scanning Area/Missing Image Area Exposure glass Document feeder ADF Copy Paper Recommended Paper Sizes and Types Non-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Place your originals Basic ProcedureMake sure that the machine is in Copy mode Press the Start key Auto Off Placing Originals Placing Originals on Exposure Glass Limit mark Document guide Loading Originals Document Feeder ADFPlacing Standard Size Originals Placing Custom Size Originals You can also enter this mode by pressing the R/# key Text Basic FunctionsSelecting an Original Type Photo Selecting Copy Paper Sort SortSort Enter the number of copy sets with the number keys After all originals are scanned, press the R/# key Copying from the Bypass Tray When copying onto OHP transparencies Push down the paper guide re- lease lever Press the R/# key When copying onto standard size paperWhen copying onto custom size copy paper When copying onto envelopes User Codes Setting the User CodeOther Functions Auto Start Press the OK key Preset Reduce/EnlargePress the Reduce/Enlarge key Place your originals, and then press the Start key Enter the desired reproduction ratios with the 0 or 1 key ZoomPress the Zoom key Enter the ratio Enter the desired ratio with the number keys Landscape L originals CombinePortrait K originals Select with the 0 or 1 key, and then press the OK key Load your originals, and then press the Start key Combination Chart Following shows the combinations of functions Copying Display Machine Operation ProblemsGeneral Cannot Make Clear Copies Cannot Make Desired Copies Combine Push the paper tray in until it stops HLoading PaperLoading paper in the optional paper tray unit Readjust the back fence and side fences HChanging the Toner Cartridge Regarding toner storage, see p.15 Toner Storage HChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Changing the Paper Size in the Paper Tray Adjust the back fenceChanging the Paper Size Adjust the side and back fences to the new paper size Square the paper and load it in the tray Push the paper tray in until it stops When you have selected Custom Size on step E Selecting the Paper Size with the User Tools Troubleshooting User Tools Copier Features Accessing the User Tools Copier Features Exiting the User Tools User Tools Menu Copier Features Settings You Can Change with the User Tools Copier Features Menu Description User Tools Copier Features Remarks Dos and Donts Optimum environmental conditions Where to Put Your MachineMachine Environment Environments to avoid Power Connection Access to Machine Cleaning the machine Maintaining Your Machine Remarks Mainframe First copy time Copy paper weightNon-reproduction area Copying speed Weight Power consumptionDimensions W ⋅ D ⋅ H up to exposure glass Noise Emission *1 Document Feeder ADF Option for Type Paper capacity Paper Tray Unit OptionAvailable paper size Additional functions 32MB Copier Memory Unit OptionMemory capacity Number of originals that can be stored about 99 pages Index Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045