Loading Originals Document Feeder ADF | Lanier 5613 specification

Copying

Loading Originals in the

Document Feeder (ADF)

Note

❒The original might become dirty if it is written with a pencil or similar

2 tools.

❒Do not place any foreign objects on the document feeder (ADF) or cov- er it with your hand.

Reference

Regarding originals that the docu- ment feeder (ADF) can handle, see p.10 “Originals”.

A Adjust the guide to the original size.

B Place the aligned originals face up into the document feeder (ADF).

Note

❒Do not stack originals above the limit mark.

❒To avoid a multi-sheet feed, shuffle the originals before set- ting them in the document feed- er (ADF).

Placing Standard Size

Originals

Note

❒When the copy paper size and the original size differ, follow the steps below.

A Press the {Menu} key.

B Press the 0 or 1 key to select "3. Original Size", and then press the {OK} key.

Note

❒ You can also enter this mode by pressing the {R/#} key.

❒ When the bypass tray is select- ed, the {R/#} key does not work to enter this mode.

1.Limit mark

2.Document guide

20

Image 32

Lanier 5613 manual Loading Originals Document Feeder ADF, Placing Standard Size Originals, Limit mark Document guide

Contents

5613 Means Power ON. c means Stand by Safety Information Safety During OperationPage Positions of Labels and Hallmarks for Rwarning and Rcaution How to Read this Manual Symbols Machine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components On indicator Operation switchControl panel Bypass tray Options Paper tray unit Copier only Fax and/or printer installed Control Panel Fax function keys Fax installed machine only Dial Function keys Fax in- stalled machine onlyPrinter function keys Printer in- stalled machine only Number keys Panel Display Displays and Key OperationsCopy display Common keys Turning On the Power Turning On the Main PowerOperation switch right side of the control panel Main power switch left side of the machine Turning Off the Main Power Press the operation switch to make the On indicator go onTurn off the main power switch Starting the Machine Changing Modes Originals Metric versionInch version Non-recommended originals for the document feeder ADF Original Sizes and Scanning Area/Missing Image Area Exposure glass Document feeder ADF Copy Paper Recommended Paper Sizes and Types Non-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Basic Procedure Make sure that the machine is in Copy modePlace your originals Press the Start key Auto Off Placing Originals Placing Originals on Exposure Glass Limit mark Document guide Loading Originals Document Feeder ADFPlacing Standard Size Originals Placing Custom Size Originals You can also enter this mode by pressing the R/# key Basic Functions Selecting an Original TypeText Photo Selecting Copy Paper Sort SortSort Enter the number of copy sets with the number keys After all originals are scanned, press the R/# key Copying from the Bypass Tray When copying onto OHP transparencies Push down the paper guide re- lease lever Press the R/# key When copying onto standard size paperWhen copying onto custom size copy paper When copying onto envelopes Setting the User Code Other FunctionsUser Codes Auto Start Press the OK key Preset Reduce/EnlargePress the Reduce/Enlarge key Place your originals, and then press the Start key Zoom Press the Zoom key Enter the ratioEnter the desired reproduction ratios with the 0 or 1 key Enter the desired ratio with the number keys Landscape L originals CombinePortrait K originals Select with the 0 or 1 key, and then press the OK key Load your originals, and then press the Start key Combination Chart Following shows the combinations of functions Copying Display Machine Operation ProblemsGeneral Cannot Make Clear Copies Cannot Make Desired Copies Combine Push the paper tray in until it stops HLoading PaperLoading paper in the optional paper tray unit Readjust the back fence and side fences HChanging the Toner Cartridge Regarding toner storage, see p.15 Toner Storage HChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Changing the Paper Size in the Paper Tray Adjust the back fenceChanging the Paper Size Adjust the side and back fences to the new paper size Square the paper and load it in the tray Push the paper tray in until it stops When you have selected Custom Size on step E Selecting the Paper Size with the User Tools Troubleshooting User Tools Copier Features Accessing the User Tools Copier Features Exiting the User Tools User Tools Menu Copier Features Settings You Can Change with the User Tools Copier Features Menu Description User Tools Copier Features Remarks Dos and Donts Where to Put Your Machine Machine EnvironmentOptimum environmental conditions Environments to avoid Power Connection Access to Machine Cleaning the machine Maintaining Your Machine Remarks Mainframe Copy paper weight Non-reproduction areaFirst copy time Copying speed Power consumption Dimensions W ⋅ D ⋅ H up to exposure glassWeight Noise Emission *1 Document Feeder ADF Option for Type Paper capacity Paper Tray Unit OptionAvailable paper size 32MB Copier Memory Unit Option Memory capacityAdditional functions Number of originals that can be stored about 99 pages Index Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045