Safety Information, Safety During Operation | Lanier 5613 specs

Safety Information

When using your equipment, the following safety precautions should always be followed.

Safety During Operation

In this manual, the following important symbols are used:

RWARNING:

Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.

RCAUTION:

Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.

RWARNING:

•Connect the power cord directly into a wall outlet and never use an ex- tension cord.

•Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or otherwise damaged.

•To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or screws other than those specified in this manu- al.

•Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any of the following conditions exists:

•You spill something into the equipment.

•You suspect that your equipment needs service or repair.

•Your equipment's cover has been damaged.

•Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open flame.

•Disposal can take place at our authorized dealer or at appropriate col- lection sites.

•Dispose of the used toner cartridge in accordance with the local regu- lation.

i

Image 3

Lanier 5613 manual Safety Information, Safety During Operation

Contents

5613 Means Power ON. c means Stand by Safety During Operation Safety InformationPage Positions of Labels and Hallmarks for Rwarning and Rcaution Symbols How to Read this Manual Machine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components Bypass tray On indicatorOperation switch Control panel Paper tray unit Options Control Panel Copier only Fax and/or printer installed Number keys Fax function keys Fax installed machine onlyDial Function keys Fax in- stalled machine only Printer function keys Printer in- stalled machine only Common keys Panel DisplayDisplays and Key Operations Copy display Main power switch left side of the machine Turning On the PowerTurning On the Main Power Operation switch right side of the control panel Starting the Machine Turning Off the Main PowerPress the operation switch to make the On indicator go on Turn off the main power switch Changing Modes Non-recommended originals for the document feeder ADF OriginalsMetric version Inch version Exposure glass Document feeder ADF Original Sizes and Scanning Area/Missing Image Area Recommended Paper Sizes and Types Copy Paper Non-recommended Paper Paper Storage Toner Toner StorageUsed Toner Basics Press the Start key Basic ProcedureMake sure that the machine is in Copy mode Place your originals Auto Off Placing Originals on Exposure Glass Placing Originals Loading Originals Document Feeder ADF Placing Standard Size OriginalsLimit mark Document guide Placing Custom Size Originals You can also enter this mode by pressing the R/# key Photo Basic FunctionsSelecting an Original Type Text Selecting Copy Paper Sort SortSort After all originals are scanned, press the R/# key Enter the number of copy sets with the number keys Copying from the Bypass Tray Push down the paper guide re- lease lever When copying onto OHP transparencies When copying onto standard size paper When copying onto custom size copy paperPress the R/# key When copying onto envelopes Auto Start Setting the User CodeOther Functions User Codes Preset Reduce/Enlarge Press the Reduce/Enlarge keyPress the OK key Place your originals, and then press the Start key Enter the desired ratio with the number keys ZoomPress the Zoom key Enter the ratio Enter the desired reproduction ratios with the 0 or 1 key Combine Portrait K originalsLandscape L originals Load your originals, and then press the Start key Select with the 0 or 1 key, and then press the OK key Following shows the combinations of functions Combination Chart Copying Machine Operation Problems GeneralDisplay Cannot Make Clear Copies Combine Cannot Make Desired Copies HLoading Paper Loading paper in the optional paper tray unitPush the paper tray in until it stops Readjust the back fence and side fences Regarding toner storage, see p.15 Toner Storage HChanging the Toner Cartridge HChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Adjust the back fence Changing the Paper SizeChanging the Paper Size in the Paper Tray Square the paper and load it in the tray Adjust the side and back fences to the new paper size Push the paper tray in until it stops Selecting the Paper Size with the User Tools When you have selected Custom Size on step E Troubleshooting Accessing the User Tools Copier Features User Tools Copier Features Exiting the User Tools User Tools Menu Copier Features Copier Features Settings You Can Change with the User Tools Menu Description User Tools Copier Features Dos and Donts Remarks Environments to avoid Where to Put Your MachineMachine Environment Optimum environmental conditions Power Connection Access to Machine Maintaining Your Machine Cleaning the machine Remarks Mainframe Copying speed Copy paper weightNon-reproduction area First copy time Noise Emission *1 Power consumptionDimensions W ⋅ D ⋅ H up to exposure glass Weight Document Feeder ADF Option for Type Paper Tray Unit Option Available paper sizePaper capacity Number of originals that can be stored about 99 pages 32MB Copier Memory Unit OptionMemory capacity Additional functions Index Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045