Press the Zoom key Enter the ratio | Lanier 5613 instruction

Copying

Zoom

You can change the reproduction ra- tio in 1% steps.

2

Note

❒You can change the reproduction ratio from 50–200%.

❒You can select a ratio regardless of the size of an original or copy pa- per. With some ratios, parts of the image might not be copied or mar- gins will appear on copies.

❒You can select a preset ratio which is near the desired ratio, and then adjust the ratio with the 0 or 1 key.

A Press the {Zoom} key.

B Enter the ratio.

When using the 0 or 1 key

A Enter the desired reproduction ratios with the 0 or 1 key.

Note

❒To change the ratio in 1% steps, just press the 0 or 1 key. To change the ratio in 10% steps, press and hold down the 0 or 1 key.

❒To change the ratio entered, press the {Clear/Stop} key, and then enter the new ratio.

When using the number keys

A Enter the desired ratio with the number keys.

Note

❒To change the ratio entered, press the {Clear/Stop} key, and then enter the new ratio.

C Press the {OK} key.

D Place your originals, and then press the {Start} key.

Note

❒When you place originals in the document feeder, set the origi- nal size. See p.20 “Placing Stan- dard Size Originals”

34

Image 46

Lanier 5613 manual Press the Zoom key Enter the ratio, Enter the desired reproduction ratios with the 0 or 1 key

Contents

5613 Means Power ON. c means Stand by Safety Information Safety During OperationPage Positions of Labels and Hallmarks for Rwarning and Rcaution How to Read this Manual Symbols Machine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components Control panel On indicatorOperation switch Bypass tray Options Paper tray unit Copier only Fax and/or printer installed Control Panel Printer function keys Printer in- stalled machine only Fax function keys Fax installed machine onlyDial Function keys Fax in- stalled machine only Number keys Copy display Panel DisplayDisplays and Key Operations Common keys Operation switch right side of the control panel Turning On the PowerTurning On the Main Power Main power switch left side of the machine Turn off the main power switch Turning Off the Main PowerPress the operation switch to make the On indicator go on Starting the Machine Changing Modes Inch version OriginalsMetric version Non-recommended originals for the document feeder ADF Original Sizes and Scanning Area/Missing Image Area Exposure glass Document feeder ADF Copy Paper Recommended Paper Sizes and Types Non-recommended Paper Paper Storage Toner Storage TonerUsed Toner Basics Place your originals Basic ProcedureMake sure that the machine is in Copy mode Press the Start key Auto Off Placing Originals Placing Originals on Exposure Glass Placing Standard Size Originals Loading Originals Document Feeder ADFLimit mark Document guide Placing Custom Size Originals You can also enter this mode by pressing the R/# key Text Basic FunctionsSelecting an Original Type Photo Selecting Copy Paper Sort SortSort Enter the number of copy sets with the number keys After all originals are scanned, press the R/# key Copying from the Bypass Tray When copying onto OHP transparencies Push down the paper guide re- lease lever When copying onto custom size copy paper When copying onto standard size paperPress the R/# key When copying onto envelopes User Codes Setting the User CodeOther Functions Auto Start Press the Reduce/Enlarge key Preset Reduce/EnlargePress the OK key Place your originals, and then press the Start key Enter the desired reproduction ratios with the 0 or 1 key ZoomPress the Zoom key Enter the ratio Enter the desired ratio with the number keys Portrait K originals CombineLandscape L originals Select with the 0 or 1 key, and then press the OK key Load your originals, and then press the Start key Combination Chart Following shows the combinations of functions Copying General Machine Operation ProblemsDisplay Cannot Make Clear Copies Cannot Make Desired Copies Combine Loading paper in the optional paper tray unit HLoading PaperPush the paper tray in until it stops Readjust the back fence and side fences HChanging the Toner Cartridge Regarding toner storage, see p.15 Toner Storage HChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Changing the Paper Size Adjust the back fenceChanging the Paper Size in the Paper Tray Adjust the side and back fences to the new paper size Square the paper and load it in the tray Push the paper tray in until it stops When you have selected Custom Size on step E Selecting the Paper Size with the User Tools Troubleshooting User Tools Copier Features Accessing the User Tools Copier Features Exiting the User Tools User Tools Menu Copier Features Settings You Can Change with the User Tools Copier Features Menu Description User Tools Copier Features Remarks Dos and Donts Optimum environmental conditions Where to Put Your MachineMachine Environment Environments to avoid Power Connection Access to Machine Cleaning the machine Maintaining Your Machine Remarks Mainframe First copy time Copy paper weightNon-reproduction area Copying speed Weight Power consumptionDimensions W ⋅ D ⋅ H up to exposure glass Noise Emission *1 Document Feeder ADF Option for Type Available paper size Paper Tray Unit OptionPaper capacity Additional functions 32MB Copier Memory Unit OptionMemory capacity Number of originals that can be stored about 99 pages Index Toner User Codes, 31 User Tools Ventilation hole Zoom Memo UE USA B045